Safety and Health Standards – CSA

The Canadian Standards Association is a not-for-profit membership-based association serving business, industry, government and consumers in Canada and the global marketplace.

Safety and Health Standards – CSA

CSA Group works closely with leading independent agencies and associations to promote safety standards in North America and around the world.

CSA marks confirm that a product has been tested and has met the applicable standards for safety & performance as outlined by ANSI, UL, CSA, NSF and more.

CSA Marks & Labels for North America

Special inspection for electrical health care products – “Your electric health care product is tested against the provincial guidelines Field Approval of Health Care Equipment plus any applicable CSA Group health care product standard requirements.”

Special inspection for electrical health care - CSA

Field Certification & Field Evaluation Programs

“These programs allow CSA labels to be applied to a limited run of products in the field, where ever they are used or installed in the U.S. and Canada.”

CSA Group
178 Rexdale Blvd. Toronto, ON Canada M9W 1R3

CE – Conformite Europeenne – Safety Standards

The CE marking is required for many products. It states that the product is assessed before being placed on the market and meets EU safety, health and environmental protection requirements.

CE marking – Enterprise and Industry

The CE marking (also known as CE mark) is a mandatory conformity mark on many products placed on the single market in the European Economic Area (EEA).

CE – Conformite Europeenne – Safety Standards

CE marking signifies that the product conforms with all EC directives that apply to it. For example, most electrical products must comply with the Low Voltage Directive and the EMC Directive; electrical toys must also comply with the Toy Safety Directive.

CE - Conformite Europeenne - Safety Standards

CE – European Economic Area – EEA – Safety mark

“It is the manufacturer’s responsibility to carry out the con- formity assessment, to set up the technical file, to issue the EC declaration of conformity and to affix CE marking on a product. Distributors must verify the presence of both the CE marking and the necessary supporting documentation. If the product is being imported from a third country, the importer has to verify that the manufacturer outside the EU has undertaken the necessary steps and that the documentation is available upon request.”

6 Steps to CE marking for your product – PDF

Sensitron Power Semiconductors

Sensitron Power Semiconductors

“Sensitron is a privately held company, founded in 1969 and located on Long Island in Deer Park, New York.

Sensitron Power Semiconductors

Sensitron’s Motor Control expertise extends the usefulness of electronic technologies, bridging the gap between semiconductor devices and their systems usage. Sensitron’s capabilities include fully Integrated 3-Phase Brushless DC Motor Control Subsystem including power stage, non-isolated driver stage and controller stage.”

  • Schottky Diodes
  • Motor Controllers
  • Solid State Relays
  • IGBT and MOSFET Drivers
  • Lightning Strike Protection
  • Power Factor Correction

Sensitron RF Products

RF Modules

Features:

  • Highly Integrated custom RF Modules
  • Switches: Up to 40 GHz
  • Amplifiers:upto 60W CW, 1200W Pulsed
  • Amplifiers: Up to 30GHz, Power Class A, AB, C, D and E

ZiLOG – Application Specific SoC

Founded in 1974 by Federico Faggin, the inventor of the world’s first microprocessor, ZiLOG builds semiconductor products that enable design engineers to break through the barriers to creativity and innovation in embedded design.

ZiLOG – Application Specific SoC

ZiLOG is the inventor of the award-winning Z80 and Z8 microchip architectures that have been embedded in over a billion end-use devices worldwide.

“Companies get more innovative products to market faster because ZiLOG products and design tools help them turn their imagination into consumer appliances, remote controls, vending machines, telecommunications controllers, home automation systems, spacecraft instrumentation, industrial automation systems, and thousands of other products.” – Zilog

ZNEO Z16F Series Development Kit

ZNEO Z16F Series Development Kit

Evaluate and create your ZNEO Z16F Series MCU product solution. The development platform includes Zilog’s Developer Studio II (ZDS II) Integrated Development Environment as well as a complete suite of ZNEO Z16F microcontroller architecture software tools. ZDSII provides an enviroment that streamlines code compilation and development.

Zilog Z80 microprocessor family

The image is from – Zilog Z80 microprocessor family

Zilog Worldwide U.S. Headquarters
1590 Buckeye Drive Milpitas, CA 95035-7418, USA.