About delabs
This is in continuation of the earlier story About delabs. This predates the story of Process Control i rendered there.
This blog is in memory of the email newsletter. Amps-n-Volts. It ran for three years, it had over 100 subscribers, around 2002-3. This blog is dedicated to Test & Measurement Instruments and Equipment. I started as an Instrumentation Engineer even while i was doing my degree, i got a part time job in a Instrumentation Marketing firm called TMPL. Here they would Sell and Service brands like Genrad, Racal Dana, Data I/O, Electrovert. They were also manufacturing a 8085 based Optical Component Assembly Guidance System.
Here is one of my first Commercial Products, a 20 Tera Ohm Insulation Tester I made around 20 Years Back. It had even Polarization Index for Transformer Insulation.
A regulated, low ripple, high voltage of very low current capability is applied by instrument on a DUT (device under test). The leakage current in nA or pA (picoamps, nanoamps) is measured and readout, The Innovation i did was to measure the current in Vref and not Vin of ICL7107, this made the 1/x computation. – Insulation Tester.
Just after Engineering College, I was Two-Timing, A semiconductor Marketing Job on one hand, on evenings and weekends a Secret Instruments Research and Manufacturing Lab called DACT Elektrotech Laboratories. There was no Conflict of Interest, at least this term was not yet invented yet. Soon my MBA Manager found out my hidden operation, but he pretended he was unaware. He later helped me get a customer who had a need of custom instrumentation. This instrument was a Transistor Beta and Vce Tester, used in Incoming Inspection of Power Transistors. See more at my Test and Measurement Instruments page.
Google Plus Pages
G+ Profiles
Important Note about delabs and dapj
I work Independently and have no Representatives. I am not affiliated to any Firms or Groups.
My Creative Work, ideas and documents can be used for Product Design and Development by R&D Engineers, Hobbyists, Students and even firms for creating useful products. These cannot be used for reprint, replication or publishing online or offline.
More
delabs is an archive of my learning and experience as a Entrepreneur and Employed Engineer.
delabs and dapj websites are content managed by me. My experience is in the design of custom industrial and instrumentation products. delabs plans to be a web-service for product design and development. I like to work on projects related to Electronics and Internet.
I get letters asking questions, so i record in Circuits FAQ the questions and answers, If you want a project designed by me you can visit my Design Service page, which is a paid service.
If you wish to contact me, use the email or comment on any blog. Need to discuss with me in person? Then there is a nominal consultancy fee, Start by introducing yourself here Contact Form or Interface on delabs Tweeter.
delabs is made of a few tech websites online, It is an archive of my experience in Industry and Business. I have a wide exposure in the broad area of Electronics Engineering, Automation, Instrumentation and Industrial Components.
You can Advertise in the delabs Pages and Tech Blogs, Read more here – Advertising in delabs. If you wish to meet me in person, discuss online or talk, then contact me by mail, to start.
Anantha Narayan delabs
These are Tech Blogs i maintain to jot products and services of various firms in relation to Electronics Product Design and Development. You will also find here some of my product and circuit designs. Some of my design, manufacturing experience and learning notes too are being recorded.
Electronic Circuits and Schematic Diagrams contain the designs with some notes. dapj Gadgets has the EE Tutors.
delabs Design Devices lists Tech Companies, Components, Engineering Services and Electronics Manufacturing Firms.
delabs Content Map provides a view of all pages. The Main delabs website is delabs Circuits.
You can learn about practical electronics from my blogs here Schematics of delabs and Solderman’s Basic Electronics. If yo are a Do-it-Yourself Enthusiast or part of Amateur Radio Groups you will find Hobby DIY Garage resourceful.
Electronics and Technology Sections
- Design Gopher – Product Design, EDA, ASIC Design.
- Components and Materials – Parts, Instruments, Tools.
- Tech Products Preview – Engineering Products Cladistics.
- Hyper Embedded – Microcontroller, SOC, FPGA, ASIC.
These are the main circuit sections, these have circuits in PDF format with Source design files and PCB layouts for some. If you want only Schematic Images with brief description, remain on this blog.