Connection Diagram of DC PCB SSR
This is an Application note i used to give with my ssr - app012.pdf - Ananth
Diagram of SSR 5000 DC 3-30 Control / 230V AC N.O. @ 3A.
This is a Thyristor Based Normally Open 230V Switch that can be turned on / off at a fast rate. This switches at Zero Crossover . Use 5V DC for Best Results.
- No moving parts hence no wear and tear.
- Dissipates Heat when in On Condition 5 Watts @ 3 Amps.
- Mount with adequate Air Ventilation for 3 Amps.
- Dissipation is 1.4 Watts per Amp thru Load.
- Input to Output is optically isolated 1kV.
- This one is DC 3-30 Control AC 230V N.O. Output.
- Off state snubber Leakage is around 1 mA.
Notes -
The Termination’s of High Current Lines going to Load must be very tight and crimped. Loose contacts will Spark and cause Fire.
Fast Blow Fuse is to be used. Use a 2 Amps Fuse with Holder in the Hot Line.
Write a comment
You need to login to post comments!