Design Resources
Information for electrical engineers when designing or specifying GE equipment.

Publication Library
Technical documentation, time current curves, CSI Specifications.

GE Industrial Systems

Programs available that provide analytical tools, advanced power quality analysis, monitor energy consumption, and manage loads.

 

Colorado Electronic Product DesignCEPD picoUSB

CEPD offers a wide range of consulting services targeted at providing cost effective design options. With expertise in …

  • Digital Signal Processing (DSP)
  • Embedded Systems Hardware and Software
  • Telemetry Systems
  • Motor Control Systems
  • Programmable Logic: FPGA / CPLD / EPLD
  • Analog Circuit Design
  • Switching Power Supply Design
  • Printed Circuit Board (PCB) Design and Layout

News-

The picoUSB is a prototyping board for Altera CPLDs. The system is placed in the low-end, low-price segment. With the Quartus II Web Edition design software package, you will be programming your own designs into the device in no time. The picoUSB is ideal for introductory Digital logic courses.

picoUSB Features :

  • picoUSB printed circuit board with 44 PLCC socket
  • External access to each pin of socket/package
  • EPM3032ALC44-10 (32 Macrocells, 600 gates, 34 user I/O); we reserve the right to ship a larger EPLD with the board
  • JTAG output header allows it to be used as an Altera compatible programmer
  • Programming interface for directly connecting the picoUSB to your PC
  • Board dimensions: approximately 3.5 inches x 4 inches
  • Patch field for your own circuitry.
 

AnalogHome.Com – Steven C. Hageman Electronic design services for Industrial, OEM and Consumer clients in the areas of: Analog, RF, Digital, Microcontroller, Firmware, Software, Power Supply and high performance PCB board design. Steve C. Hageman Hagtronics – Articles and Schematics by Steve – Construction projects for homebrewers (homebrew electronics that is!).

Oct 302008
 

When a product has to be made small, the board real estate is limited or it has to be manufactured in large numbers…. SoC is the Answer. A Microprocessor evolved into a Microcontroller by packing many external chips into one chip. Now uC Card along with the other blocks like A-D, Port Drivers, Networking elements, Display Driver and other peripherals can be packed into one chip. Some Power Supply and RF blocks cannot be easily added inside as they have a silicon processing more specific to their applications. Laser trimmed Instrumentation Op-Amps, high accuracy resistor arrays, high value capacitors, magnetics [Read More ....]

Oct 292008
 

Avtech Applications Information General Applications Information What Coaxial Cable Should I Use? How Can I Connect to an SHV Connector? How Can I Extend the Amplitude Range to Low Levels? How to Deliver a Fast 2 Amp Pulse to a Diode in a Probing Station Avtech manufactures over 500 standard models of pulse generator, amplifier, or pulsed laser diode driver.

Oct 292008
 

Keithley Instruments designs, develops, manufactures and markets precision electronic test and measurement instruments and systems. Keithley Handbooks Classroom Courses Web-Based Training Voltage Measurement Guide

Oct 292008
 

Agilent – Application Notes Advancing electronics, communications, life sciences and chemical analysis. Oscilloscopes, Analyzers, Meters Generators, Sources, Supplies Fundamentals Components & Specific Devices Build Your Own Test System

Oct 282008
 

When you are trying to arrive at a complex Embedded Systems and Communications solution, You will think of a DSP. Now that computers and embedded devices are used in most electronic devices, DSP is a way you can process, transform, analyze and generate fast analog data, in Real Time. Real Time ideally is instantaneous or in sync, in tandem. Not an Zepto Second lost. But in the real world many analog inputs or result outputs can be processed a lot slower. So it is more like, How ‘real time’ you want, how cost-effective a real-time solution can be provided. If [Read More ....]

 
Electromagnetic Relays and SSR

Electromagnetic Relays – NO – Normally Open – when the relay is not energized or activated, this terminal is open-circuit. NC – Normally Closed – when the relay is not energized or activated, this terminal is closed circuit. COM – The Common Center Terminal in relays. This is the center terminal that closes circuit with NC-NO. The terminals are potential free and floating and are insulated from the control signals or coil windings by many kilo volts. Many provide visible isolation. These terms apply to SSR or Big Contacters too. Relays and Contactors Drive SCR thyristor 555 Relay Driver Solid [Read More ....]

© 2011 delabs Technologies Suffusion theme by Sayontan Sinha