Training Consulting

Design and Development, Software and Hardware Training Resources.

Connexions – share educational material

Jan 182012

A place to view and share educational material made of small knowledge chunks called modules that can be organized as courses, books, reports, etc. Anyone may view or contribute.

Connexions – share educational material

Connexions is a dynamic digital educational ecosystem consisting of an educational content repository and a content management system optimized for the delivery of educational conte A First Course in Electrical and Computer Engineering

A First Course in Electrical and Computer Engineering

Provides readers with a comprehensive, introductory look at the world of electrical engineering. It was originally written by Louis Scharf and Richard Behrens at the University of Colorado. This collection includes MATLAB exercises and diagrams that step readers through a broad range of topics, including phasors, circuit analysis, binary coding, and more.

Freshman Engineering Problem Solving with MATLAB

This course, originating at Arizona State University at the Polytechnic Campus, is intended to introduce freshman engineering students to problem solving using an m-file environment, such as MATLAB, LabVIEW MathScript, Octave, etc. It is designed for the novice programmer, and covers the most commonly used features of the language.

Technical Writing and Support

Training Consulting No Responses »

Oct 032011

Proper documentation of product after design include Engineering Documentation, Production and Purchasing Inputs, Service Manuals, Operator Manual, Quick Reference Cards. Charts and Tech Catalogs.

There are more important documentation before you start planning product design. These impact everything else, but we should not get stuck up on Red Tape.

Docs, Notes and Logging are essential and need to be simple. ISO 9000/Agilent – “Document what you do. Do what you document.”

Safe and Sound – Product Safety

Training Consulting No Responses »

Sep 282011

Product Safety Product should not give even the lightest shock, Even metal parts on user side to be laminated. High energy circuits never enters analog and digital circuit areas without Opto or other Isolation. Gadgets, Furniture, Tools and Storage Units should not cause injury. Rounded Edges, Non Toxic. Worker Safety Helmet, Goggles and Face/Respiratory Mask when working with power tools/ abrasion and large objects. Crepe Bandage, Neoprene Ankle/Knee/Thigh Support when pushing or pulling or Physical Exertion. Waist/Back Support Belts and Straps to reinforce back/spine while doing Heavy Lifting or Movement. Waistband Thick Belt or Traditional Sash helps Posture and prevents [Read More ....]

Materials and Inventory Management

Training Consulting No Responses »

Sep 012011

The Inventory of a Firm should be Open within an Organization. Searching with a browser, Integrateable with departmental webware/intranet. With a very easy readable non-programmer friendly API. The Search must be based on Multiple Keywords, Filters or Tags. Dormant Inventory and Parts/Equipment/Furniture not on any live project anymore, Excess Inventory and Obsoleted Parts due to Tech Advancement; should be flagged. This enables other departments to use it, consume it for Maintenance or Research projects or integrate into new designs if not-obsolete. If found to be valueless, damaged or worn-out by all departments and responsible engineers, then inventory should be sold [Read More ....]

Ergonomics and Safety of the Workplace

Training Consulting No Responses »

Aug 082011

First Aid and Flame Resistant Uniforms At Cintas you will find many Tools to make workplace safe. These are like Uniforms and Apparel, First Aid and Safety, Fire Protection and Flame Resistant Clothing. Also a Cleanroom Resources section, which is very important for Microelectronics and Precision Instrumentation. In spite of “Prevention better than cure”, a worker can get injured, more so on the field, where preventive measures may not be in place. Here is a Portable First Aid Kit that should be in Service and Commissioning Departments. A stitch in time saves nine. in reference to: “Your employees may require [Read More ....]

Technical Resource – Marc Dekenah

Electrical, Training Consulting No Responses »

May 252011

Useful resource on Power Quality, Radio Telemetry, T&M and Interfacing. Marc’s Technical Pages Economical Impulse Generator, Measuring in Excess of 1kV, “Soft Earthing” Instruments and A Real LAN twist cable are pages you must read. Marc’s Technical Pages; knowledge-base of Faultlink International, an independent electrical / electronics fault investigation & analysis consultancy. Marc is an independent electrical/electronic fault investigation and analysis consultant with over 25 years of industrial electrics/electronics experience as Consultant, System Engineer, Technical Director, Design Engineer and more.

John Loomis – Computing and Engineering

ASIC EDA, Training Consulting No Responses »

Mar 182011

Dr. John S. Loomis is the Associate Professor in the Electrical and Computer Engineering Department of The University of Dayton. John Loomis – Course Web Pages At the Course pages you can see subjects like Signal Processing, Digital Signal Processing, Analog Microelectronics Design and Electro-Optics. Altera DE2 Board and Projects with Nios II CPU “The Altera Development and Education (DE2 ) board from Terasic Technologies Inc. is a wonderful vehicle for learning about digital logic, computer organization, and FPGAs. Featuring an Altera Cyclone II FPGA, the DE2 board offers varied technology suitable for university and college laboratory use, a wide [Read More ....]

Doug Joness Index – Douglas W. Jones

Training Consulting No Responses »

Mar 162011

Computer Students can have look at the Obsolete Computer Technology pages/links. To know how computing evolved is important, before the new generation can change the way computing happens. Doug Joness Index – Douglas W. Jones Some subjects covered are Operating Systems, Computer Security and High Performance Computer Architecture. Mechatronics and Robotics students will find Stepping Motors useful. Assemblers and linkers are good reference for the Embedded Systems Engineer. Some things that would interest an ardent DIY Enthusiast or The Skillful and Adept Handy-Craft Community. A Tutorial Introduction to Bookbinding The Prairie Paper Project

Interactive Power Electronics Seminar

Power Electronics, Training Consulting No Responses »

Mar 112011

The interactive and animated applets are part of the Introductory Course on Power Electronics taught by Prof. Kolar at the ETH Zurich. Interactive Power Electronics Seminar Power Electronics Circuit Simulation Applets to See – are the simple Buck-converter and the Rotating Three-Dimensional Field More pages of Compulsory Reading for Students Part I – An Overview of AC/AC-Converter Topologies iPES-Circuits – DC/DC converters, thyristor converter, AC/DC inverter. iPES-Circuits+ – Power electronic systems of higher complexity in industry. iPES-Thermal – Dimensioning and operation of power electronic converters iPES-EMFields – Electrostatic, magnetic fields, permeability, inductor design. iPES-AET – Operational Amplifier – Applications. Gecko [Read More ....]

Older Entries

Suffusion theme by Sayontan Sinha

delabs Tech