Production Notes – Electrical – 02

All Electronic Products have interfaces to external electrical circuits. The power supply is also derived using converters or power supplies. Motors, Heaters and Transformers are examples of components in the electric power circuits.

  • 12V lead acid batteries should be charged with a constant current CC and constant voltage charger the CV being 13.6V. Deep discharge and over charging will reduce the cycles.
  • Lead acid batteries need a monthly distilled water update to ensure long life, sealed lead acid dont need attention. Keep lead acid batteries in well ventilated area due to acid fumes.
  • Electric Shock can kill hence take great care, Electrolytic capacitors burst and Transformers catch fire. turn off equipment after use. turn off all electricity when going out of town.
  • Inductive kickback starts a tubelight or automobile as high voltages are produced when current in inductor is turned off. This also is the cause of failure in power semiconductors.
  • Earthing is important, ensure it’s perfect, the neutral to earth could be 5V AC max., also a circuit breaker and fuse a must. Use a electrical earth leakage circuit breaker to protect both man and machine.
  • Extra care should be taken to prevent injury to eyes while working. Also 230V/110V shock can be fatal. working on high energy electrical circuits and power electronics should be with all precautions.
  • You need a Fuse, Circuit breaker and earth leakage circuit breaker for safety against shock and fire hazard.
  • High voltage or current stress, mechanical vibration, user misuse, High Energy stress (freq and voltage), aging (cycles) cause failure.
  • Good earthing, servo motor regulated mains supply, earth leakage circuit breaker and over current circuit breaker, HRC fuse are some safety steps to take.
  • When working with HV or HE circuits wear shoes, keep yourself dry, the supply board should have above protections in red.
  • Use silicone shrink sleeves to insulate or close exposed high voltage wire ends or joints.
  • Sparking at the high voltage mains supply power contacts like a plug can cause electronic gadgets to fail.

About delabs

delabs is a web-service for product design and development.
Bookmark the permalink.

Comments are closed.