Indesign – Electronic Product Development

Indesign, LLC. Indianapolis. – Engineering Services – Electronic Product Design Engineering.

Indesign – Electronic Product Development

Activity – Engineering Design of Electronic Products and Systems. Engineering Design Center. A Company formed in 1996 by a group of Bell Labs engineers. Specializations – Electrical, Software, Mechanical, Human Factors, Testing. Areas- Consumer, Medical, Computer, Military, Industrial, Automotive, etc.

Indesign: Electrical Design

Indesign: Electrical Design

Indesign has an extensive set of tools for electrical circuit design, simulation, and testing, including programmable logic design. The combination of talented engineers and state of the art equipment, allows Indesign to deliver a design optimized for functionality and manufacturability (DFX)

Indesign, LLC.
8225 E 56th St Indianapolis, IN 46216

Microdesigns – Microcomputer System Development

Microdesigns, Inc. is an Engineering and manufacturing services company specializing in microcomputer and electronic systems.They design both board- and box-level products, software and industrial systems.

Microdesigns – Microcomputer System Development

Shown on the right is a SBX board providing two independent RS-232C or RS-422A/449 serial ports with individually programmable baud rates; a battery-maintained clock/calendar with programmable periodic, time-of-day alarm and power fail interrupts; and 8K, 32K or 128K bytes of battery-maintained CMOS RAM.

QwikFlash Development Kits – QwikFlash board with accessories and optionally an expansion board and stand.

QwikFlash Development Kits

The QwikFlash board developed by Dr. Peatman and his Georgia Tech students is a compact microcontroller demonstration board with on-board resources that are found in many real-world applications. MICRODESIGNS offers QwikFlash as a fully assembled and tested board assembly with a programmed microcontroller.

Microdesigns, Inc.
1979 S. Bibb Dr. Tucker, GA 30084, USA

Rigel – Embedded Controllers and Reads51

Manufactures embedded controllers for the 8051, ARM7, C166/C167, and ST10 processors. They supply the hardware, software, and textbooks for embedded Ethernet, industrial control, education, and research.

Rigel – Ebedded Controllers and Software

Provides professional hardware design, OEM manufacturing services, and industrial software development for the 8051, and ARM7.

Rita-51J is a low-cost Internetworkable controller board using Rigel’s Internet Technology Architecture (RITA). The MCS-51 / CS8900A combination takes advantage of readily available hardware and software tools as well as the wealth of publicly available applications source code.

Rita-51J is a low-cost Internetworkable controller board

Reads51 – 8051 IDE C Compiler Assembler Reads51 allows writing, compiling, assembling, debugging, downloading, and running applications software in the MCS-51 language. Reads51 contains a C compiler, relative assembler, linker/locator, editor, chip simulator, assembly language debugger, and host-to-board communications in a user-friendly, menu-driven environment.

Reads51 - 8051 IDE C Compiler Assembler

Graphically, the IDE consists of the main menu, customizable toolbars, and various windows. All windows, except the editor window are dockable. Dockable windows may be attached to any side of the IDE, or left floating anywhere on the desktop

  • 8051 Hardware and Software Product Overview
  • Rita51, 8051 Embedded Controller for the Internet
  • R-A7SJ, ARM Controller

“Rigel Corporation also provides professional hardware design, OEM manufacturing services, and industrial software development for the 8051, and ARM7.”

Rigel Corporation – 4300 NW 23rd Ave, Gainesville, FL 32606

Glew Engineering – Technology Expertise

Consulting Service for the semiconductor and microelectronic industry, FEA modeling, mechanical, electrical & materials engineering applications.

Glew Engineering – Technology Expertise

Experts in Electrical, Materials and Mechanical Engineering Consulting. Consulting and Support areas include Business Development, Solar & Flat Panel Technologies, Materials Science among many others.

FEA Applied to Semiconductor Equipment

CAD and finite element analysis (FEA)

FEA allows for comprehensive modeling of the chamber’s integrity during testing conditions. The FEA model serves as a virtual experiment that allows reduction in prototype cost and testing. An accurate model can reduce the costly repercussions of an incorrectly designed system.

(They may cover Mems and Mechatronics too. – delabs)

Glew Engineering Consulting Inc. 240 Pamela Drive, Mountain View, CA 94040 USA

Contec Austria – Engineering and Manufacturing Service

Innovative design, development and production services in electronics and technology. Industrial and medical applications. Engineering Service and Manufacturing Services.

Contec Austria – Engineering and Manufacturing Service

A turnkey manufacturer or developer and producer of special components.
Contec Austria - Engineering and Manufacturing Service

Contec – Product Development and Consulting

Scope – Microcontroller technology, digital signal processing, rapid digital technology, FPGA programming, power electronics, analogue circuit technology, drive systems and components, automation technology, field bus technology (CAN, Profibus, Interbus-S, Mod-Bus, Lon-Bus, ASI-Bus), computer programming, etc

Contec Steuerungstechnik & Automation GmbH
Wildbichler Straße 2E 6341 Ebbs Austria

TÜV SÜD America – Certification and Consultancy

TÜV SÜD is an international service corporation focusing on consulting, testing, certification and training. At over 600 locations, primarily in Europe, North America, Asia Pacific,

tuv america certificate

TÜV SÜD America – Certification and Consultancy

History – Independent TÜVs Founded in the 1870’s by the German steam boiler industry.

“Technischer Überwachungsverein” means “Technical Inspection Association”

Services – Consultancy, inspections, tests and expert opinions as well as certification and training.

Objectives – Reliability, safety and quality as well as environmental protection and cost effectivenes

TÜV SÜD – Munich, Germany

TÜV SÜD Group is headquartered in Munich, Germany.

Franklin Software 8051 Development Tools

Franklin Software 8051 Development Tools

ProView32 is a fully featured and Integrated Development Environment that provides smooth seamless access to all the tools in the professional developers arsenal. From editing to debugging, ProView32 can manage all aspects of product development for any member of the 8051 family.

ProView32 For 8051, 80C251, and XA

From Hyper Embedded – Microcontroller ASIC and EDA

The project manager creates a link between the various files that comprise a project and the tools necessary to create that project. A project is dedicated to a target: 8051, 251 or XA; and each of the project’s files are associated, by their file type, to the appropriate translating tool. C and assembler files are translated by the compiler and assembler, respectively. The linker manages object and library files, and output format conversion as necessary.

Franklin Software, Inc.
1608 W. Campbell Ave., PMB 8051 Campbell, CA 95008