Robotics Machinery

Engineering design and build resource available on a consulting basis. Product design Specialization in Electro-Mechanical Products like manufacturing tools and systems.

Concurrent Design - Design Technology Service

The Areas where the Services are offered include

• Product Development for Electronic, Medical and Clean Energy,
• Industrial Product Design for Semiconductor Tools and Equipment
• Process Automation requiring Custom Machine Design
• Equipment Design Engineering for Manufacturing Tools or Factory Automation
• Custom Machine Design Engineering Services for Material Handling Equipment

Electronic Equipment Design - Hybrid Burn-in Test Chassis for High Volume Product Manufacturing Client: Electronics Industry.

Provides engineering services, functional test systems, pipe inspection robotic systems and product design consulting for a wide variety of industries. They have a team of Associate Consultants and Engineers, Specialized and Experienced in Diverse Domains like RF Communications, Manufacturing process optimization, High Technology Testing for Research or Laboratory grade systems.

Electromechanica - Engineering Services

Areas include embedded microcontroller, mixed signal, RF, and motion control engineering. Electromechanica integrates entire hardware systems and develops the software to control and measure their performance.

Electromechanica, Inc. 13 Industrial Dr., Rear, Unit 2, Mattapoisett, MA 02739

Silicon Cell Chuck - Electromechanica

This system fixtures silicon solar cells during test. The chuck features a liquid heat exchanger to provide thermal management of the chuck face during high energy testing. An innovative contact bar system was designed to provide low resistance connection to the front side of the cell while keeping a low profile to eliminate shading.

BOWest is an Electrical and Project Engineering Consultancy within the mining, mineral processing and power generation industries. Their Enginnering Service includes technical support for design, construction, commissioning, optimization and troubleshooting Medium and Large Electrical Systems, Plants and Machines.

BOWest - Electrical and Project Engineering

The Principal Engineer is Trevor A Bowland - BSc BA CEng MIEE

Technical reference library in electrical engineering, published by BOWest Pty Ltd, Perth, Western Australia.

Electrical Engineering Reference - BOWest

The library does not include diagrams, it has the Definitions and Formulae for most or even nearly all that you will need in an Engineering Project. They have Theorems and Formulae for Electrical Circuits, Systems and Machines.

BOWest Pty Ltd - PO Box 330, Quinns Rocks WA 6030, Australia

Develops, designs, and manufacturers flexible shaft couplings for the motion control industry.

Rocom Corporation - Flexible shaft couplings

These are used in electronics assembly, IC wafer handling, mass storage, metrology, rotary instruments and office equipment. They have been designed withe a special emphasis on reliabilty, this helps deliver exceptional stability and outstanding vibration dampening properties.

E Series - A Coupling with an Expandable Shaft

Some Features are -

• All E and F couplings have an inside relief so the shafts will not touch the beams at the maximum misalignment ratings.
• Clamps are an integral part of the coupling and cannot be removed.
• All screws are hex socket, steel with black oxide finish. For stainless steel screws.
• Screw torques are the screw manu-facturer's maximum ratings.
• Coupling material is 2024-T3.51. QQA225/6 aluminum with MIL-A8625 Type II black anodize.

Rocom Corporation Map - 5957 Engineer Drive, Huntington Beach, CA 92649-1129. USA.

Dimensional measurement instruments. Product line includes dial indicators, optical comparators, snap gages, bore gages and other measurement devices.

Dorsey Metrology - Measurement Devices

Seen on right is a 16H Horizontal Beam Optical Comparator. This ultra precision optical comparator utilizes an integrated zero backlash, high resolution scale and a free state, normalized zero stress stage.

16H Optical Comparator - Dorsey Metrology

Some highlights - 16"(400mm) vertical screen for optimum viewing, High resolution ground glass screen with calibration reticle, 90 degree cross lines and chart clips, Machined chart ring with vernier protractor, 1 minute graduation.

Interface - @dorseymetrology

Formed in July 2010 as a joint venture combining two premier tool manufacturers: Danaher Tool Group and Cooper Tools... Global Company Manufacturing High Quality, Reliable and Robust Hand tools, power tools, and tool storage. Based in Sparks, Maryland USA.

Apex Tool Group - Danaher and Cooper Tools

Brands include -

Weller - Soldering and Desoldering, BGA/QFP/SMT Repair, Hot Air Technology and Fume Extraction.

Xcelite- Screwdriver, nutdrivers, pliers, and tool kits.

Shown Below is a Erem 4 3/4" Micro Stripping Pliers used in Electronics Manufacturing. It is a precision stripper, Adjustable from 30-40awg insulation like Teflon, Tefzel & Fiber Optic Cables.

Erem - MagicSense Pliers and Cutters

Myotoku Ltd. is a Japan-based company engaged in the manufacture and marketing of vacuum equipment and components.

CONVUM of Myotoku - Vacuum Equipment

Products include vacuum generators in the CONVUM brand, vacuum pads, pressure sensors, filters, vacuum pump systems and mini cylinders. Suction pads and Electronic Instruments like Digital Pressure Sensor Displays too.

Company : Myotoku Ltd., 2-6-18 Shimomaruko, Ohta-ku, Tokyo, Pin 1460092 - Japan