A RTOS which is also a OSS. Drivers and Libraries designed for the rapid development of embedded software.
BeRTOS – Real Time Operating System
BeRTOS was born as a extremely modular, highly optimized and fine-tuned operating system for embedded programming. As a result, each module has its own scope and can be used alone or in cooperation with other modules. It’s even possible to use most of the drivers without activating the kernel module.
New architectures are supported at every new release. Here are a few
- Arduino Duemilanove ATmega328P
- ARM7TDMI Atmel AT91SAM7 series, NXP LPC2XXX series
- ARM Cortex-M3 Luminary Stellaris (LM3S),ST Microelectronics STM32
Example projects using BeRTOS
This section includes real world examples of BeRTOS usage. These examples are full featured programs that you can download, compile and flash directly on your board.
DevelGPS – Stellaris
The purpose of this project is to implement a portable GPS locator / geocaching finder with the Cortex-M3 based Luminary Micro LM3S1968 evaluation board. The device proposes a user interface to configure the GPS coordinates of a target location and shows on the OLED display the direction and distance to reach the target.
ARM designs the technology that lies at the heart of advanced digital products, from wireless, networking and consumer entertainment solutions to imaging, automotive, security and storage devices…
ARM – Advanced Digital IP and Processors
ARM provides developers with intellectual property (IP) solutions in the form of processors, physical IP, cache and SoC designs, application-specific standard products (ASSPs), related software and development tools.
netX – Tools and Evaluation Boards by Hilscher GmbH
A quick and economical entry into the netX technology is achieved with the netSTICK and the NXHX starter and software development board. Both contain a USB debug interface and are provided with the HiTOP development environment. This permits evaluation of the protocol interfaces and the rcX Real-Time kernel as well as development of own application software which can be tested on these boards.
SKY-S9500-ULP-C01 by CALAO Systems
Embedded Computer with SKY form-factor (85 x 85 mm), ST-Ericsson Nova A9500 – 1GHz, This has most of the interface wanted like Ethernet, USB, Serial Port RS-232, HDMI Full HD, WiFi, BlueTooth, GPS, 3 axis accelerometer / magnetometer / Gyrometer, pressure sensor and a lot more.
Global supplier of integrated circuits for personal and networked computing and communications.
AMD – Integrated Circuits for Computing
They design and manufacture graphics cards and microprocessors that power computers, tablets, embedded devices and servers.
AMD 690 series chipset is the first integrated ATI Radeon graphics chip technology and support for ATI Avivo TM technology, AMD chipset, providing the ultimate viewing experience, including high-resolution format, smooth video playback, vivid multimedia images.
AMD 690 series chipset
Analog, Mixed-signal and Optoelectronic Components and Subsystems
Avago Technologies Semiconductors
Avago Technologies brings together the capabilities and track record of an established global leader with the “energy and responsiveness of a startup. We spent our first three decades as part of HP, ……”
- Color Management & Sensors
- Motion Control Solutions
- Light Emitting Diodes (LEDs)
- Infrared Transceivers
- Fiber Optics
Precision Optically Isolated Voltage Sensor
“Optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1G? input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems..”
ViPEC is a powerful tool for the analysis of high frequency, linear electrical networks. It takes a schematic description of the electrical network and performs a linear analysis in the frequency domain.
ViPEC Network Analyzer
The output is in the form of port parameters (S, Y or Z) with results presented on a user defined grid, Smithchart or table. It can also be used to compute other characteristics like stability factors and group delay.
ViPEC supports various lumped elements (capacitors, resistors etc.) as well as distributed networks like transmission lines, microstrip and stripline structures. Two port data files are also supported (e.g. the 2-port frequency parameters of various RF transistors as supplied by the manufacturer). The component library is under constant development with new elements added at regular intervals.