Design Services (Page 2)

Product and Circuit design Services and Design Engineers.

They offer a comprehensive electronic design service. They specialize in analog, digital, audio, video, RF and mixed signal circuits.

Pronine Electronics Design Consulting

They also undertake electronic circuit and printed circuit board design. Some products developed are like .. test instruments, specialized research equipment, amplifiers, PLL synthesizers and power supplies.

Pronine Electronics Design Consulting

Microprocessor System Development, RF-Wireless and Networks are in the list of their Capabilities.

These services include prototype PCB fabrication and assembly. The service also may include component procurement too. They also help making your Engineering Documents Electronically Accessible.

Pronine Electronics Design
3228 Savary Ave, Coquitlam, BC V3E 1M3, Canada

ISO 9001-2000 Certified Manufacturer of EMI filters and electronic and electromechanical systems.

WEMS – EMI filters and Electronic Manufacturing

“EMI / RFI Filter Division designs and manufactures high reliability input, output, powerline and signal line filters intended for military, aerospace, and high end industrial applications.”WEMS - EMI filters and Electronic Manufacturing

Contract Manufacturing facilities of Wems Include –

  • Mechanical and Electronic Engineering
  • PCB Design & Assembly
  • Thru-hole Board Assembly
  • Surface Mount Assembly
  • Inspection & Testing to Aerospace, Military and Medical Standards

Box Build Specialists WEMS Manufacturing facilities offer total vertical integration.

Contract Manufacturing Division encompasses a wide variety of skills and technologies, including high voltage, high current, hydrolics, pneumatics and complete system assembly.

WEMS Electronics
4650 West Rosecrans Ave. Hawthorne, CA 90250

Provides engineering services, functional test systems, pipe inspection robotic systems and product design consulting for a wide variety of industries.

They have a team of Associate Consultants and Engineers, Specialized and Experienced in Diverse Domains like RF Communications, Manufacturing process optimization, High Technology Testing for Research or Laboratory grade systems.

Electromechanica – Engineering Services

Areas include embedded microcontroller, mixed signal, RF, and motion control engineering. Electromechanica integrates entire hardware systems and develops the software to control and measure their performance.

Electromechanica - Engineering Services

Intergrated Hipot/Functional System

Electromechanica designed and fabricated multiple test systems for a leading electrical switch manufacturer. These new systems removed a production bottleneck by reducing test cycle time. Ergonomic design reduced part handling and setup while increasing operator safety…

Electromechanica, Inc.
13 Industrial Dr., Rear, Unit 2, Mattapoisett, MA 02739, USA.

Engineering design and build resource available on a consulting basis. Product design Specialization in Electro-Mechanical Products like manufacturing tools and systems.

Electronic Equipment Design - Concurrent Design

Concurrent Design – Design Technology Service

The Areas where the Services are offered include

  • Product Development for Electronic, Medical and Clean Energy,
  • Industrial Product Design for Semiconductor Tools and Equipment
  • Process Automation requiring Custom Machine Design
  • Equipment Design Engineering for Manufacturing Tools or Factory Automation
  • Custom Machine Design Engineering Services for Material Handling Equipment

Electronic Equipment Design – Hybrid Burn-in Test Chassis for High Volume Product Manufacturing Client: Electronics Industry.

FDI makes Development Kits, Touch Screen Kits, SBC and many other Embedded System Tools. They also offer Engineering and Manufacturing services.Derivative Board for TSSOP with LPC938 loaded

Test Board for P89LPC938 – Future Designs

NXP – P89LPC938 is a 8-bit microcontroller with accelerated two-clock 80C51 core 8 kB 3 V byte-erasable Flash with 10-bit A/D converter

NXP – P89LPC938

The USB-Dongle provides a Virtual COM Port interface to the PC and allows hex files to be downloaded and programmed using Flash Magic or other common utilities.

USB Programming Interface for Derivative Boards USB Programming Interface for Derivative Boards

Derivative Boards – In general, Derivative Boards require the use of the USB-Dongle for power and a programming interface. Low cost Derivative Boards are available for many different microcontrollers from NXP. Supported families include the LPC9xx, ARM7 LPC2xxx and 89V52X2.

FDI Engineering Design Services

Future Designs, Inc.
996 A Cleaner Way SW, Huntsville, AL 35805, USA

New serial interface RS-422 improved upon RS-232 serial communications which was Noise prone. RS-422 uses two signal lines.

RS-485 enhances RS-422 with an ability to connect upto 32 devices. Now we have Industrial Interface methods like Zigbee, Ethernet, Modbus etc.

RS-485 Serial Interface – McShane, Inc.

Temperature Controller for DC Load and TEC

Temperature Controller for DC Load and TEC

Model 5C7-582 or Model 5C7-583 temperature controllers provide automatic biphase heating and cooling control for Thermoelectric (Peltier effect, or TEC) modules.

More about the Company

Founded by Philip Johnson in 1964, McShane, Inc. supplies process control equipment, OEM devices, and industry services from our location south of Cleveland, Ohio.

They also provide services like Leading Edge Custom Built Designs, Prototyping and Manufacturing.

McShane, Inc.
3633 Trails End Dr., Medina, Ohio, 44256-8770, United States.

Product design and development is for the Innovative Engineer. Here Antronics have on display, some projects and design ideas that have been realized.

Antronics Ltd – Project Design Portfolio

A product design by Antronic – The BT redcare alarm monitoring system provides continuous monitoring of a BT telephone line that links a professionally installed alarm system.

Antronics Ltd - Project Design Portfolio

Antronics Ltd – Embedded Systems Specialists

Consultancy Services to Clients developing Embedded Microprocessor Systems. Design and development of software/firmware for embedded microprocessor and microcontroller systems. Specialized in Products which need “M2M” applications; ie, “machine-to-machine” communications.

delabs Notes

In product development, the most important thing is to communicate and interact with the customer. To get the inputs very clear, goes a long way in customer satisfaction and project’s technical success.

Even if the customer is not able to create a Black Box Specifications but is able to indicate the need or problem. Then you can arrive at the specs by incremental prototyping, to gather full requirements.

Converts normally wasted mechanical energy in the form of vibrations into usable electrical energy. It uses the piezoelectric effect to generate energy from Vibrations.

Piezoelectric Energy Harvester - V20w

Piezoelectric Energy Harvester – V20w

Some sources are Machinery in Oil and Gas drilling to refining. Machines in Industry and Manufacturing. Wind, Tide, streams also can be harnesses with small fixtures, jigs or devices for vibration sensor arrays.

Applications – Wireless Sensors and small instruments need a way to recharge their lithium cells or even supercaps. Using solar and vibration harvesting, enough power can be derived to power efficient electronics. Recharge small computers and tablets.

From – Mide Technology

They are specialists in smart engineering materials technology. They create state-of-the-art solutions to uncommon engineering challenges. They are also a Engineering Service and design, develop, and test a turn-key custom prototypes.