The QT600 is a starter kit and development system for Atmel’s AVR 8-Bit and 32-Bit RISC Flash microcontrollers.
- USB Interface to PC
- QT600 is powered by a USB interface
- 3 MCU-boards (ATtiny88, ATmega324PA, ATxmega128A1)
- 3 sensor boards for up to 64 channels
New Starter kit for Qtouch library
RS brings you a Design resource called DesignSpark. When i had to source some hard to find parts as a replacement or design component for a custom product, RS catalog was the answer.
The catalog would give an idea also of what parts are popular and summary specs. This was decades ago, now everything is Online, Datasheets, Manuals, Design resources, Application Notes and most important the Creative IP of many a Genius, from the world over.
The Web or Internet is the spirit of a True and Healthy Globalization, which is for Knowledge Sharing and Free Communication for Positive Growth of Skills. Most important, it enables an Intrepreneur (Internet Entrepreneur) to explore and establish his Trade Online with modest investments.
It is not easy to find complete working embedded projects with designs, code and kit. At Tuxgraphics you will find a way to start your embedded skill development, then expand from hobby to solving some real situations in the nearby small factories or labs. Applied Science is Technology. Hobby is a Door to science that makes Science and Technology Delicious. – Ananth delabs
Tuxgraphics AVR Microcontroller Projects
Temperature measurement and equipment control over the internet
“We attach a couple of digital temperature sensors (maxim dallas 1-wire sensors) to the tuxgraphics ethernet board and we can use that not only to see the current temperature but also to plot temperature graphs with 5 days of history. To do this an embedded web server is running on the ethernet board along with drivers for the sensors.”
Buy the Kits here – The tuxgraphics shop: shop.tuxgraphics.orgserver for Instrumentation.
Interface – @tuxgraphics
digital DC power supply unit – A very small an really good DC bench power supply unit for your hobby lab. It has lots of features which you normally find only in very expensive power supplies. This one is affordable, small and easy to build.
Temperature and humidity measurements with the AVR web-server – Just add this one SHT11 sensor. No other components are needed to measure temperature + humitidy + dew point.
Mini 3 digit display, a small and inexpensive voltmeter module – We build a simple and inexpensive three digit display. It’s a voltmeter module but it has also gerneral purpose digital IO pins.
Buy the Kits here – The tuxgraphics shop: shop.tuxgraphics.org – here you can get all the components needed to build a small Web-server for Instrumentation.
AVR microcontroller based ethernet device / web server, version 1.4, kit
Components and professionally etched printed circuit board for building a small web server. The main application of those web servers is not so much to provide large web pages but to be able to control hardware. You can switch something on/off, display sensor data, supervise network equipment …
The Xmegalab is a development board for AVR XMEGA microcontrollers, a dual channel oscilloscope, an arbitrary waveform generator and a scientific calculator.
AVR XMEGA Oscilloscope and Waveform generator
- ATXMEGA128A1 microcontroller with 128KB Flash, 8KB SRAM, 2KB EEPROM
- External serial SRAM 32KB
- Arbitrary Waveform Generator, 1MSPS, using the XMEGA’s internal DAC
- JTAG and PDI interfaces for development
- User external connection with digital I/Os or SPI interface
- Graphic LCD 128×128 pixels with backlight
Gabotronics – Designs and manufactures embedded systems. Specialized in 8-32 bits microcontroller projects, instrumentation and data acquisition, PCB Layout, custom electronic designs and engineering consultation. Based in Palmetto, FL.
Open Source Electronics. Hardware and gadgets. Embedded Cards with Support Cards and Components. Be in Sync. with the Embedded Electronics for Quick Prototyping and Gadget Creation.
Liquidware – Embedded Electronics Source
Neapolitan pizza of Open Source hardware and Arduino modules.
Ultimate Gadget Pack – Liquidware
It Includes many things, some listed below …
- Arduino Duemilanove
- TouchShield Stealth
- TouchShield Slide
- Open Source Hardware, Volume 1
- Mini black Protoboards
The emergence of “instant prototyping” vs. “rapid prototyping”
Also see the Popular Beagle Embedded Starter Kit – LW
AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers.
AVR Libc – Atmel AVR C library
Together, avr-binutils, avr-gcc, and avr-libc form the heart of the Free Software toolchain for the Atmel AVR microcontrollers. For a complete prepackaged Windows version of the toolchain, please see the WinAVR project.
The Teensy is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the USB port.
Teensy USB AVR with Teensyduino – PJRC
- USB can be any type of device
- AVR processor, 16 MHz
- Single pushbutton programming
- Easy to use Teensy Loader application
- Free software development tools
- Available with pins for solderless breadboard
The Teensy Loader makes getting code into your Teensy easy. Just press and release the reboot button and the processor runs the HalfKay bootloader, which is automatically detected.
From – PJRC Electronic Projects
AVRTS2080A – Atmel Touch Library ATmega88
“The AVRTS2080A board is an ideal kit for evaluating the Atmel Touch Library implemented on the ATmega88. The kit comes preloaded with software for two buttons, one slider and one rotor.”
ATmega88PA – picoPower technology AVR Microcontroller. 8K Byte self-programming Flash Program Memory, 1K Byte SRAM, 512 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF).
- Flash (Kbytes): 8 Kbytes
- Pin Count: 32
- Max. Operating Frequency: 20 MHz
- CPU: 8-bit AVR
- Touch Channels: 12
- Max I/O Pins: 23
- Ext Interrupts: 24